Your Position: Home - Products - Concrete Mixer -

Self-loading Mobile Concrete Mixer

Self-loading mobile concrete mixer is an equipment combined with concrete mixer truck and concrete mixing station. Raw material loading, weighting, mixing and discharging all rolled into one. It could not only be used to transport the concrete but also produce the concrete at site. 


More detailed product information to please download the PDF
  PDF Download>>

Introduction:

Self-loading mobile concrete mixer is an equipment combined with concrete mixer truck and concrete mixing station. Raw material loading, weighting, mixing and discharging all rolled into one. It could not only be used to transport the concrete but also produce the concrete at site. 

Performance:

Load: Because of the specially designed hinge type hydraulic shovel, this mixer can load the material easily and accurately. There is a blade in the shovel so that the cement bag can be cut automatically to avoid the waste of cement. All the ingredient can be fed into the mixing barrel from the top of shovel;
Mixing : After the aggregate and cement are fed into the mixing barrel, they will be mixed with the pressed water from the double water tanks which are on the truck. The specially designed double screw to confirm the quality of concrete (if required, we can equip the electronic weighing system) 
Transport: This mixer is fit for any working site because of its 4 wheel hydraulic drive system and favorable configuration. It can crawl on the 30 degree slope at a full load situation;
Discharging: Adopt the revolutionary solution. The operator can control the mixing barrel at a 300 degree rotation so that it can discharge the concrete at a 2 meters height, 4 directions.
Operation: There is a well appointed cab. The driver can operate almost all the actions through a handle shank.
Safety: This mixer equipped with ROPS-FOPS system to provide the driver with comprehensive safeguard.

Specification:

Technical data:

Name Item Specification Name Item specification
Vehicle Net weight 7500 KGS Diesel engine Type 4BT3.9- C 110
Gross weight 15000 KGS Rated power/rpm 82kW/2200rpm
Driving mode Hydraulic drive Max. torque/rpm 460 N.m/1400rpm
4x4 drive
Brake mode Hydraulic brake Cylinder 4 cyliners/3.9L
Front and rear independent system Bores 102mm
Cooling type Water cooling
chassis Off-road, CARRARO axle Fuel consumption 207kg/kW.h
Distance of front/rear wheel base 1905mm Starter Electric
Wheel base 2155mm Displacement standard China II
Loader Capacity 0.6m³ Mixer Drum capacity 3.5m³, 14 m³/h
Control Hydraulic Slope degree 16
Climbing capacity 30 degree Rotation speed 10-16r/min
Speed High 0-20km/h Angle of drum rotation ≥270º
Low 0-9km/h Discharging chute Swing angle ≥60º
Min. turning radius 6.5m/R Angle control Hydraulic
Tire type 16/70-20 Size (optional) Long: 106cm
Dimension (L*W*H) 7011*2441*3310(mm) Short: 40cm
Name Item Specification Name Item specification
Vehicle Net weight 9500 KGS Diesel engine Type 6BTAA5.9- C 150
Gross weight 23000 KGS Rated power/rpm 110kW/1950rpm
Driving mode Hydraulic drive Max. torque/rpm 718 N.m/1200rpm
4x4 drive
Brake mode Hydraulic brake Cylinder 6 cyliners
Front and rear independent system Bores 102mm
Cooling type Water cooling
chassis Off-road, CARRARO axle Fuel consumption 221kg/kW.h
Distance of front/rear wheel base 1950mm Starter Electric
Wheel base 2750mm Displacement standard China II
Loader Capacity 0.7m³ Mixer Drum capacity 6m³, 24 m³/h
Control Hydraulic Slope degree 16
Climbing capacity 30 degree Rotation speed 10-16r/min
Speed High 0-15km/h Angle of drum rotation ≥270º
Low 0-9km/h Discharging chute Swing angle ≥60º
Min. turning radius 7.5m/R Angle control Hydraulic
Tire type 18-19.5 pr16 Size (optional) Long: 106cm
Dimension (L*W*H) 7600*2500*3350(mm) Short: 40cm

Prink Web favorites Top